Problem
Spillage and dust were becoming constant sources of concern and burden for this Southeastern plant. Their existing transfer chute was not designed within Conveyor Equipment Manufacturers Association (CEMA) specifications and therefore was causing excessive material spillage and airborne dust. Handling 20,000 tons of crushed rock per month put them at huge risk for material and profit loss. The plant estimated they were losing several thousands of dollars in labor expenses every week! Cleanup was not only an expensive maintenance task but also a dangerous one. Airborne dust can garner negative attention from regulatory agencies and lead to fines. Looking for a cleaner and safer solution to their dust and spillage problems, the plant contacted Martin Engineering.
Solution
Martin Engineering recommended completely redesigning the transfer point to accommodate the necessary equipment. The chute was installed from the crusher to the belt. Belt support systems were added so the wear liner could be as close to the belt as possible and within CEMA specifications, ensuring the elimination of spillage and reduction of dust from the generated and displaced air from the secondary cone crusher. Martin installed belt cleaning systems due to the sloped chutes from the crusher to the conveyor. Martin provided belt alignment and tail protection solutions to keep the belt from wandering and to prevent damage to the belt and tail pulley. The plant provided the material and labor for the chute redesign while Martin supplied installation supervision and equipment upgrades.
Result
The quarry foreman is extremely happy with how the transfer point and system upgrades turned out. In fact, they turned out so well that there is no visible dust in sight. One of the loader operators noticed that the crusher "went down." Upon inspection, he learned that the crusher was operating fine but that since there was no visible dust, the crew thought it was down. Prior to the upgrades, the loader operators used to verify that the crusher was working because of the presence of dust. The plant has provided a safer environment for its workers by eliminating the need for manual cleanup. Martin outlined a second phase of solutions/upgrades to further reduce dust if needed.
